Sent: Saturday, March 27, 2021 1:20 PM
To: MSAccessProfessionals@groups.io <MSAccessProfessionals@groups.io>
Subject: Re: [MSAccessProfessionals] Winning team auto calculate
Duane,
The reason I used a macro is because I could not figure out to run the function from the "after update" property of the Score field with using a sub. I guess I could move all of the code to the after update property. I try a few things and see if I can get it to populate the correct field.
Thanks for your help. I will let you know how it goes.
Bill
Minnesota
Office 365
From: MSAccessProfessionals@groups.io <MSAccessProfessionals@groups.io> On Behalf Of Duane Hookom
Sent: Saturday, March 27, 2021 10:54 AM
To: MSAccessProfessionals@groups.io
Subject: Re: [MSAccessProfessionals] Winning team auto calculate
I seem to remember the code will return an integer rather than Boolean so I would use Select Case rather than If.
I'm not sure how a macro got in scope of any reply. Please post the entire VBA Sub when asking for clarification.
Duane
Sent from my mobile
On Mar 26, 2021, at 11:44 AM, Bill Singer <Bill.Singer@at-group.net> wrote:
Duane,
Partial good news. The function works in the Immediate window. Here are my tests with the form open and changing the scores.
?IsWinner(23946,42442,"G")
2
1
1
3
2
1
They were all correct.
Here is the rest of the story. Here is what I did to get the function to not give me an error "after update" of the points field.
I am using the RunCode function in a Macro.
If I put this exact information in If IsWinner(Me.gteFscID , Me.gteGteID, "G") Then I get a message that says "The object doesn't contain the Automation object 'If.' " I am not sure why the If-Then is included in this but I tried it.
If I put in this exact information IsWinner(Me.gteFscID , Me.gteGteID, "G") I get a message that says "The object doesn't contain the Automation object 'Me' "
If I put in this exact information IsWinner(gteFscID , gteGteID, "G") I get a message that says "The object doesn't contain the Automation object gteFscID' "
It looks like I had an error. When I looked at my form the reference to the "game" (the two records that have the same game number) on the form is the fscFscID field so I changed gteFscID to fscFscID in the code to
IsWinner(fscFscID , gteGteID, "G") and when I go to the form and input scores and tab to the next field, I get no error, but I get nothing so I do not know if it is working.
I am guessing in the results field I will have to and IIF statement based on the results of the Function IsWinner.
The dots are connecting slowly.
Thanks,
Bill
Bill Singer
From: MSAccessProfessionals@groups.io <MSAccessProfessionals@groups.io> On Behalf Of Duane Hookom
Sent: Friday, March 26, 2021 9:02 AM
To: MSAccessProfessionals@groups.io
Subject: Re: [MSAccessProfessionals] Winning team auto calculate
The function is set up like:
Public Function IsWinner(lngFscID As Long, lngGteID As Long, Optional strGL As String = "G") As Integer
' lngFscID is the "game" and corresponds to the gteFscID column of t_EventParticipants
' lngGteID is the primary key of t_EventParticipants
To call this from the form in an after update you would need to reference the controls on the form as arguments;
If IsWinner(Me.gteFscID , Me.gteGteID, "G") Then
Typically these arguments are values in either fields or controls in the query or on a form/report. For instance if you have a control in a report footer with a control source of:
=Sum([Your Field Name])
The argument is a field in the report's record source. The same is true for using any function that requires or accepts arguments.
You can test any of your functions in the immediate window (press Ctrl+G). Then enter something like:
? Format(Date(),"yyyymm")
When you press enter you will see:
202103
Days until the end of the year:
? DateDiff("d",Date(),#12/31/2021#)
280
I used the immediate window to test and debug the IsWinner() function by typing in actual values from the tables gteFscID and gteGteID.
Duane
From: MSAccessProfessionals@groups.io <MSAccessProfessionals@groups.io> on behalf of Bill Singer <Bill.Singer@at-group.net>
Sent: Friday, March 26, 2021 8:20 AM
To: MSAccessProfessionals@groups.io <MSAccessProfessionals@groups.io>
Subject: Re: [MSAccessProfessionals] Winning team auto calculate
Bill
Duane,
Back to the IsWinning Function.
I have been doing a few tests. I have written a few functions. I have run those functions from a field on a form using the "After update" property. So far so good. My problem is that all my functions do not have arguments such as the function you wrote. After multiple hours of trying to figure out how to pass an argument to a user defined function via a macro all I have is less hair on my head.
I used the macro "RunCode" I put in IsWinning and the left had ( comes up. If I just close the parameters with the ) I get an error message .. incorrect amount of parameters.
I know I have to pass the IngFscID and the IngGteID to the function but I can't figure out how to do that. The argument strGL appears to = G so I am guessing I am not going to have to pass that optional argument.
Thanks for your patience and help.
Bill Singer
Access 365
From: MSAccessProfessionals@groups.io <MSAccessProfessionals@groups.io> On Behalf Of Duane Hookom
Sent: Thursday, March 11, 2021 7:58 AM
To: MSAccessProfessionals@groups.io
Subject: Re: [MSAccessProfessionals] Winning team auto calculate
Thanks Paul,
Bill, if you uncomment the debug.print strSQL line you will get the SQL statement in the debug window. You can copy and paste this into a new query SQL view window to see the results. If the game was sport where a low score was better you would want to sort the recordset ascending to get the lowest score first.
Duane
From: MSAccessProfessionals@groups.io <MSAccessProfessionals@groups.io> on behalf of Paul Baldy <Pbaldy@gmail.com>
Sent: Wednesday, March 10, 2021 5:57 PM
To: MSAccessProfessionals@groups.io <MSAccessProfessionals@groups.io>
Subject: Re: [MSAccessProfessionals] Winning team auto calculate
I haven't seen a response to this. That code examines what was passed to the function and determines how to sort the recordset. strSort is used at the end of this:
strSQL = "SELECT gteGteID,gtePoints FROM t_EventParticipants WHERE gteFscID = " & lngFscID & " ORDER BY gtePoints " & strSort
"DESC" will sort descending, unspecified (the "") will sort ascending.
Paul
------ Original Message ------
From: "Bill Singer" <Bill.Singer@at-group.net>
Sent: 3/10/2021 12:55:28 PM
Subject: Re: [MSAccessProfessionals] Winning team auto calculate
Duane,
Thank you. I have put this code in the previously mentioned module. It compiles fine. The day has been busy so I have not had enough time to figure out how to trigger the code in the "After update" property of the points field (gtePoints). I will work on that tomorrow.
As I read through the code I can figure out everything (I believe) except one part.
Just for my education, can you explain what the following code does. I have not seen any out put so maybe that would help.
If strGL = "G" Then
strSort = "DESC"
Else
strSort = ""
Bill
Bill Singer
Minnesota
Office 365
From: MSAccessProfessionals@groups.io <MSAccessProfessionals@groups.io> On Behalf Of Duane Hookom
Sent: Wednesday, March 10, 2021 9:08 AM
To: MSAccessProfessionals@groups.io
Subject: Re: [MSAccessProfessionals] Winning team auto calculate
Hi Bill,
Try this function. I have provided a fair amount of documentation
Public Function IsWinner(lngFscID As Long, lngGteID As Long, Optional strGL As String = "G") As Integer
' lngFscID is the "game" and corresponds to the gteFscID column of t_EventParticipants
' lngGteID is the primary key of t_EventParticipants
' strGL is a string value where "G" means the winner has the Greater/higher score
'Function should return:
' winner = 1
' loser = 2
' tie = 3
' NA = -1 only one result
Dim db As DAO.Database
Dim rs As DAO.Recordset
Dim strSQL As String
Dim strSort As String
Dim intFirstScore As Integer
Dim intSecondScore As Integer
Dim lngFirstGteID As Long
Dim lngSecondGteID As Long
If strGL = "G" Then
strSort = "DESC"
Else
strSort = ""
End If
Set db = CurrentDb
strSQL = "SELECT gteGteID,gtePoints FROM t_EventParticipants WHERE gteFscID = " & lngFscID & " ORDER BY gtePoints " & strSort
'Debug.Print strSQL
Set rs = db.OpenRecordset(strSQL)
If rs.RecordCount > 1 Then 'more than one score recorded
rs.MoveFirst
lngFirstGteID = rs!gteGteID 'grab the first GteID which should be winner or tied
intFirstScore = rs!gtePoints 'grab the first score/result
rs.MoveNext
lngSecondGteID = rs!gteGteID
intSecondScore = rs!gtePoints 'grab the first score/result
Select Case True
Case intSecondScore = intFirstScore 'it's a tie
IsWinner = 3
Case lngGteID = lngFirstGteID 'the winning participant should be the first record
IsWinner = 1
Case Else
IsWinner = 2
End Select
Else
IsWinner = -1 'only one result so winner can't be determined
End If
rs.close
End Function
Regards,
Duane
From: MSAccessProfessionals@groups.io <MSAccessProfessionals@groups.io> on behalf of Bill Singer <Bill.Singer@at-group.net>
Sent: Wednesday, March 10, 2021 7:47 AM
To: MSAccessProfessionals@groups.io <MSAccessProfessionals@groups.io>
Subject: Re: [MSAccessProfessionals] Winning team auto calculate
Bill,
I now have the book. Learning already but I can tell this will take while to get this to do what I want.
Thanks.
Bill Singer
Minnesota
Office 365
From: MSAccessProfessionals@groups.io <MSAccessProfessionals@groups.io> On Behalf Of Bill Mosca
Sent: Tuesday, March 9, 2021 1:37 PM
To: MSAccessProfessionals@groups.io
Subject: Re: [MSAccessProfessionals] Winning team auto calculate
Hi Bill
My go-to book for Access is Microsoft Access 2010 Inside Out. This is a well-organized book with everything you need to know about Access development. I know both of the authors personally and can attest to their expertise. Don't let the version scare you away. Little has changed as far as VBA programming goes from 2010.
On Tue, Mar 9, 2021 at 09:01 AM, Bill Singer wrote:Duane,
For a tie gteResID should equal a 3
I understand the concept of saving a variable but getting it to work is my issue.
I am going to have to do some reading. Any good book suggestions?
Bill
Bill Singer
Group Benefits Consultant
Phone: 763-754-8898
Fax: 763-754-8496
Toll Free: 877-902-8898
From: MSAccessProfessionals@groups.io <MSAccessProfessionals@groups.io> On Behalf Of Duane Hookom
Sent: Tuesday, March 9, 2021 10:29 AM
To: MSAccessProfessionals@groups.io
Subject: Re: [MSAccessProfessionals] Winning team auto calculate
Hi Bill,
What do you want to happen if it's a tie? What values would you place in the gteResID (results) field? You could save the first score to a variable and then use rs.MoveNext to check the next score to see if they are the same.
Regards,
Duane
From: MSAccessProfessionals@groups.io <MSAccessProfessionals@groups.io> on behalf of Bill Singer <Bill.Singer@at-group.net>
Sent: Tuesday, March 9, 2021 10:21 AM
To: MSAccessProfessionals@groups.io <MSAccessProfessionals@groups.io>
Subject: Re: [MSAccessProfessionals] Winning team auto calculate
Duane,
I finally got to this. I have entered it into a module in a test database. I Compiled the database (found an unrelated error). This compiles fine. I have been picking through it to try to understand what it is doing.
It appears to open record set for the participants of a game where the getFscID (Facility Schedule ID) matched. This would be a record set of two. It sorts by gtePoints (Scores input)
If two records are counted it continues. If one record is counted it stops.
I did realize that periodically we have games that tie game and I failed to mention that. How do I accommodate that? I am guessing that changes everything since it would be hard to sort two records with the same value.
I have not run this yet so I have not seen output.
I appreciate your help.
Bill Singer
Minnesota
Microsoft 365
From: MSAccessProfessionals@groups.io <MSAccessProfessionals@groups.io> On Behalf Of Duane Hookom
Sent: Friday, March 5, 2021 2:01 PM
To: MSAccessProfessionals@groups.io
Subject: Re: [MSAccessProfessionals] Winning team auto calculate
Hi Bill,
I tried to create a table named t_EventParticipants in my sandbox database but there was already a table with that name 😉
Copy and paste this function into a new blank module and save the module with the name "modCalculations". Make sure you compile the code.
This function accepts the gteFscID, gteGteID, and optionally a "G" for greater or any other letter for less. It will return True for a winner, False for a loser, and Null if there are no records in the table matching gteFscID. You might get false winners if only one score has been entered so
Public Function IsWinner(lngFscID As Long, lngGteID As Long, Optional strGL As String = "G") As Variant
Dim db As DAO.Database
Dim rs As DAO.Recordset
Dim strSQL As String
Dim strSort As String
If strGL = "G" Then
strSort = "DESC"
Else
strSort = ""
End If
Set db = CurrentDb
strSQL = "SELECT gteGteID FROM t_EventParticipants WHERE gteFscID = " & lngFscID & " ORDER BY gtePoints " & strSort
'Debug.Print strSQL
Set rs = db.OpenRecordset(strSQL) 'open recordset of participants in the game
If rs.RecordCount > 1 Then 'more than one score recorded
rs.MoveFirst
IsWinner = rs(0) = lngGteID 'first record will be winner since the recordset is sorted by points
Else
IsWinner = Null 'either no participants or only one recorded
End If
End Function
You can call this function in the after-update event of the score entries. You may need to save the record prior to running the function.
If IsWinner(gteFSCID, gteGteID) Then
gteResID = 1 'winner
Else
gteResID = 2 'loser
End If
Duane
From: MSAccessProfessionals@groups.io <MSAccessProfessionals@groups.io> on behalf of Bill Singer <Bill.Singer@at-group.net>
Sent: Friday, March 5, 2021 1:17 PM
To: MSAccessProfessionals@groups.io <MSAccessProfessionals@groups.io>
Subject: Re: [MSAccessProfessionals] Winning team auto calculate
Paul,
I like your idea and Duane agrees, which is always good.
I understand exactly what you are saying, which is good and bad. It is good that I understand but it is bad that I am not so good at passing variables and writing functions. I am good at tables, forms, queries, reports, but functions are difficult. I will try to do some reading and figure out how to get started. It is going to be painful. Any tips you can provide would be greatly appreciated.
The first question is, where do I put the function? Do I put it in the "After update" property of the score field, (gtePoints)?
I told you it would be painful.
Thanks,
Bill
Bill Singer
From: MSAccessProfessionals@groups.io <MSAccessProfessionals@groups.io> On Behalf Of Paul Baldy
Sent: Thursday, March 4, 2021 1:58 PM
To: MSAccessProfessionals@groups.io
Subject: Re: [MSAccessProfessionals] Winning team auto calculate
My first thought is a function to which you pass gteFscID. It would open a recordset sorted by score, filtered by gteFscID. Presuming there can be no ties, the first record is the winner and the second record is the loser (presuming the sort is by score descending). You can loop the recordset and assign those values. I'd have code to make sure there are 2 records and both have valid scores entered in case the function is called before those conditions are met.
Paul
------ Original Message ------
From: "Bill Singer" <Bill.Singer@at-group.net>
Sent: 3/4/2021 11:45:54 AM
Subject: [MSAccessProfessionals] Winning team auto calculate
I have a sports tracking database. I track game and practice schedules, scores, standing etc. The database has been working pretty well for a few years with the exception of the human element, which is me. For each game I have to enter the score of each team and then indicate if each team was the winner or loser, by entering a 1 or 2. Periodically I will enter the scores correctly by I will enter the results wrong by putting a 1 in place of a 2 or the other way around. This creates grief for me an frustration for those coaches that see the records as incorrect. I was wondering if I could get some help in trying to have the database calculate the winner or loser automatically.
I have a table that records the scores and game results. Each game gets two records, one for the home team and one for the visitor team. All the records are viewed on a continuous form.
The table is t_EventParticipants
The fields in the table are:
gteGteID – Key field
gteFscID – This is the ID for the Facility schedule, there one ID number per game, which would mean there two records with the same ID, one for Home one for Visitor.
gteTnaID – This is the Key field that referees to the team name
gteDesID – This is the key field that referees to the Home or Visitor designation
gtePoints – This is the field where the points are recorded.
gteResID – this is a Key field where a 1 or 2 is entered to designate winner or loser.
What I am hoping to do is to get the gteResID filed to automatically calculate but the problem is that I am comparing the scores in the gtePoints field from two records, which are the two records with the same gteFscID number one for the Home team and one for the Visitors team. If it was comparing field in the same record I think I could figure it out.
Any help you could provide would be wonderful.
Bill Singer
Minnesota
Windows 10
Microsoft 365
--Regards,
Bill Mosca, Founder - MS_Access_Professionals
Microsoft Office Access MVP 2010-2016
My nothing-to-do-with-Access blog
Tidak ada komentar:
Posting Komentar