Hi David
Make the top subreport smaller - only high enough for one record - and move
the bottom one up so it remains 1/4" from the top one. Then, if there is
only one record in the top one the spacing will be correct, and if there are
more then the top one will grow (because of the CanGrow property) and
everything else will be shoved down.
Best wishes,
Graham
> From: MS_Access_Professionals@yahoogroups.com
[mailto:MS_Access_Professionals@yahoogroups.com] On Behalf Of djsdaddy531
> Sent: Thursday, 27 October 2011 15:39
> To: MS_Access_Professionals@yahoogroups.com
> Subject: [MS_AccessPros] Can I reposition a subreport?
>
>
> Great Day, I have a report that displays the data of two subreports. the
report has a Report Header; a Page Header, and the two subreports are in the
detail section. In design view, these reports are positioned about a 1/4 of
an inch apart, and they are both approximately the same size, give or take
about 1/16 of an inch. However, the subreport that is on top preserves that
1/4 inch based on the amount of data that is displayed. If 4 or more records
are displayed in the top subform, then the 1/4 inch distance is preserved;
however if fewer than 4 records are displayed, then this top subform shrinks
and there is a large amount of space between the top subform and the one on
the bottom.
>
> Is there anyway to alter the position of the bottom subform to maintain
its 1/4 inch distance from the top subform when the top subform shrinks?
Aesthetically, the gap of white is not too pleasing.
>
> Thanks in advance for your assistance.
>
> Sincerely,
>
> David
Tidak ada komentar:
Posting Komentar