Hi John,
He posted it in Message #91708.
Kind Regards,
Pat Wood
--- In MS_Access_Professionals@yahoogroups.com, "John Viescas" <john@...> wrote:
>
> Doyce-
>
> PMJI, but what is the Record Source of the form? And are you changing Allow
> Additions in code somewhere? What code runs when you save the record?
>
> John Viescas, author
> Microsoft Office Access 2010 Inside Out
> Microsoft Office Access 2007 Inside Out
> Building Microsoft Access Applications
> Microsoft Office Access 2003 Inside Out
> SQL Queries for Mere Mortals
> http://www.viescas.com/
> (Paris, France)
>
>
> -----Original Message-----
> From: MS_Access_Professionals@yahoogroups.com
> [mailto:MS_Access_Professionals@yahoogroups.com] On Behalf Of patrickawood
> Sent: Saturday, July 16, 2011 12:17 AM
> To: MS_Access_Professionals@yahoogroups.com
> Subject: [MS_AccessPros] Re: Me.dirty not saving changes after initial save
>
> Hi Doyce,
>
> You could use a variable to get the ID of the Record you were in and then use it
> like below:
>
> Dim rst As DAO.Recordset
>
> If Not IsNull(MyIDVariable) Then
> 'Search for the first match.
> Set rst = Me.RecordsetClone
> rst.FindFirst "[MyIDField] = " & MyIDVariable
> If rst.NoMatch Then
> MsgBox "The Record was not found." & vbCrLf _
> & vbCrLf & " Please try again.", vbExclamation
> Else
> 'Display the found record in the form.
> Me.Bookmark = rst.Bookmark
> End If
> End If
>
> Set rst = Nothing
>
> Kind Regards,
> Pat Wood
> http://accesstips.wordpress.com
>
>
> --- In MS_Access_Professionals@yahoogroups.com, "dnwinberry"
> <winberry.doyce@> wrote:
> >
> > Pat, I think you are on to something. When I substitute requery for refresh,
> it does save the records however, it also returns to the first record in the
> table and I would like it to stay on the same record so I think I need to add
> some code to make it requery and then filter for the record I was on. Do you
> happen to have an example of how to do that?
> >
> > Doyce
> >
> > --- In MS_Access_Professionals@yahoogroups.com, "patrickawood" <pwood57@>
> wrote:
> > >
> > > Have you tried Me.Requery instead of Me.Refresh? That is quite a complicated
> query there and Me.Requery might help make sure all the data is up to date. This
> is from the Access Developer's Reference:
> > >
> > > "Since the Refresh method doesn't actually requery the database, the current
> set won't include records that have been added or exclude records that have been
> deleted since the database was last requeried. Nor will it exclude records that
> no longer satisfy the criteria of the query or filter."
> > >
> > > Kind Regards,
> > > Pat Wood
> > > http://accesstips.wordpress.com
> > >
> > > --- In MS_Access_Professionals@yahoogroups.com, "dnwinberry"
> <winberry.doyce@> wrote:
> > > >
> > > > Bill or others,
> > > >
> > > > I don't think this is form corruption. I have started from scratch with a
> brand new form and created every control as new. I'm still getting the same
> thing. I've tried disecting it taking out one control after another. I've tried
> rebuilding the query it is based on. Here's an interesting tidbit, twice now I
> have stripped down the database to just the necessary tables, forms, and querys,
> so I can upload a sample and when I do, the problem goes away. Could that mean
> corruption somewhere else? I have noticed that as long as I stay on the first
> record I can change things and the save works every time. It is only after I
> move to another record that it stops saving changes. What happens when I move to
> a different record?
> > > >
> > > > Doyce
> > > >
> > > > --- In MS_Access_Professionals@yahoogroups.com, "Bill Mosca" <wrmosca@>
> wrote:
> > > > >
> > > > > Ah! Doyce, if a new form worked and one made from copying parts does
> not, we
> > > > > have corruption. Save the code as a text file just to make that part
> easier.
> > > > >
> > > > >
> > > > >
> > > > > Delete the form; compact; make a new form from scratch. When you are
> finished,
> > > > > re-build your event procedures and paste the code from the text file
> into each
> > > > > event. Don't just paste the entire module because some of the controls
> might not
> > > > > pick up the events properly.
> > > > >
> > > > >
> > > > >
> > > > > Regards,
> > > > >
> > > > > Bill
> > > > >
> > > > >
> > > > >
> > > > > From: MS_Access_Professionals@yahoogroups.com
> > > > > [mailto:MS_Access_Professionals@yahoogroups.com] On Behalf Of dnwinberry
> > > > > Sent: Thursday, July 14, 2011 9:01 AM
> > > > > To: MS_Access_Professionals@yahoogroups.com
> > > > > Subject: [MS_AccessPros] Re: Me.dirty not saving changes after initial
> save
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > Good morning Bill,
> > > > >
> > > > > Yes, it works perfectly on the first record then will not work after a
> second,
> > > > > third, or more record is displayed. It doesn't matter whether I select
> the new
> > > > > record with a combo box or use the navigation buttons. Once a record has
> been
> > > > > saved, it no longer saves any changes I make to other records. I have
> stripped
> > > > > out all other code except Me.dirty = false and me.refresh and it still
> happens.
> > > > > The reason I display the other form is because it closes after about 2
> seconds
> > > > > and the user doesn't have to click OK. If there is a way to close a
> MSGBOX
> > > > > automatically, I don't know how. I've tried creating a new form but I
> did copy
> > > > > some of the items from the old form and it does the same thing. I've
> tried to
> > > > > create a sample for uploading and after stripping out the unnecessary
> stuff and
> > > > > importing the tables from the BE, the sample started working perfectly.
> It's
> > > > > about to drive me nuts! Perhaps I should try creating a new form and not
> copying
> > > > > anything?
> > > > >
> > > > > Doyce
> > > > >
> > > > > --- In MS_Access_Professionals@yahoogroups.com
> > > > > <mailto:MS_Access_Professionals%40yahoogroups.com> , "Bill Mosca"
> <wrmosca@>
> > > > > wrote:
> > > > > >
> > > > > > Doyce
> > > > > >
> > > > > > It works one time and then blows up? Try putting a breakpoint at the
> start of
> > > > > the event. When the code breaks press F8 to step through it so you can
> see what
> > > > > is happening.
> > > > > >
> > > > > > Also comment out all error handling if you have any in that procedure
> when
> > > > > debugging.
> > > > > >
> > > > > > One more thing...
> > > > > > Why add the extra form when all you need is a MsgBox?
> > > > > >
> > > > > > Bill
> > > > > >
> > > > > > --- In MS_Access_Professionals@yahoogroups.com
> > > > > <mailto:MS_Access_Professionals%40yahoogroups.com> , "dnwinberry"
> > > > > <winberry.doyce@> wrote:
> > > > > > >
> > > > > > > Has anyone had any other ideas on this? I appreciate the help.
> > > > > > >
> > > > > > > Doyce
> > > > > > >
> > > > > > >
> > > > > > > --- In MS_Access_Professionals@yahoogroups.com
> > > > > <mailto:MS_Access_Professionals%40yahoogroups.com> , "dnwinberry"
> > > > > <winberry.doyce@> wrote:
> > > > > > > >
> > > > > > > > Hi Crystal,
> > > > > > > >
> > > > > > > > Thanks for responding. Here is the SQL for the query:
> > > > > > > >
> > > > > > > > SELECT tblReconPrimary.UnitID, tblReconPrimary.ArrivalDate,
> > > > > tblReconPrimary.PComments, tblReconPrimary.PROGRAM,
> tblReconPrimary.LicREquest,
> > > > > tblReconPrimary.[Loaded Comments], tblReconPrimary.ShipDocPrinted,
> > > > > tblReconPrimary.Proccessed, tblReconPrimary.DateProcessed,
> > > > > tblReconPrimary.RegReceived, tblTruckloadTagDate.TagDate,
> > > > > tblTruckloadTagDate.Comments, tblTruckloadDeliveryLocations.[DELIVERY
> ID],
> > > > > tblTruckloadDeliveryLocations.DELIVERYLOCATION,
> tblTruckloadDelivery.[Delivery
> > > > > Date], tblCTLVINs.[License State], tblCTLVINs.[License Plate Number],
> > > > > tblCTLVINs.Year, tblCTLVINs.Make, tblCTLVINs.[Serial Number],
> > > > > tblTruckloadDeliveryLocations.DELIVERYLOCATION,
> tblTruckloadDelivery.TruckID,
> > > > > tblTruckloadTagDate.SuspensionSerialNumber
> > > > > > > > FROM tblTruckloadDeliveryLocations RIGHT JOIN (((tblReconPrimary
> LEFT JOIN
> > > > > tblTruckloadDelivery ON tblReconPrimary.UnitID =
> tblTruckloadDelivery.[Unit #])
> > > > > LEFT JOIN tblCTLVINs ON tblReconPrimary.UnitID = tblCTLVINs.[Old
> Number]) LEFT
> > > > > JOIN tblTruckloadTagDate ON tblReconPrimary.UnitID =
> tblTruckloadTagDate.UnitID)
> > > > > ON tblTruckloadDeliveryLocations.[DELIVERY ID] =
> > > > > tblTruckloadDelivery.DeliveryID;
> > > > > > > >
> > > > > > > > Here are the tables and their PK's:
> > > > > > > >
> > > > > > > > tblReconPrimary - UnitID
> > > > > > > > tblTruckloadTagDate - UnitID
> > > > > > > > tblTruckloadDelivery - Unit#
> > > > > > > > tblTruckloadDeliveryLocations - Delivery ID
> > > > > > > > tblCTLVins - Old Number
> > > > > > > >
> > > > > > > > 'do you have fields in the table design :
> > > > > > > > '- designated as Required? NO
> > > > > > > > '- text fields with no for AllowZeroLength? NO
> > > > > > > > '- DefaultValue specified when it should be blank (especially
> check
> > > > > numeric foreign keys) NO
> > > > > > > >
> > > > > > > > The query is updateable.
> > > > > > > >
> > > > > > > > 'Do you have a form BeforeUpdate event? NO
> > > > > > > >
> > > > > > > > I appreciate you taking the time to help!!
> > > > > > > >
> > > > > > > > Doyce
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --- In MS_Access_Professionals@yahoogroups.com
> > > > > <mailto:MS_Access_Professionals%40yahoogroups.com> , Crystal
> <strive4peace2008@>
> > > > > wrote:
> > > > > > > > >
> > > > > > > > > Hi Doyce,
> > > > > > > > >
> > > > > > > > > what is the SQL for the query?
> > > > > > > > >
> > > > > > > > > do you have fields in the table design :
> > > > > > > > > - designated as Required?
> > > > > > > > > - text fields with no for AllowZeroLength?
> > > > > > > > > - DefaultValue specified when it should be blank (especially
> check
> > > > > numeric foreign keys)
> > > > > > > > >
> > > > > > > > > what unique indexes are on the table(s) in the query?
> > > > > > > > >
> > > > > > > > > ~~~
> > > > > > > > > this attempts to save the record:
> > > > > > > > > Me.Dirty = False
> > > > > > > > >
> > > > > > > > > Do you have a form BeforeUpdate event?
> > > > > > > > >
> > > > > > > > > although it is cheap, after I do me.dirty = false, I test it
> again. For
> > > > > now, this might be a good idea till you can figure out why the record
> isn't
> > > > > saving -- at least your message won't tell the user it is saved.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > Warm Regards,
> > > > > > > > > Crystal
> > > > > > > > >
> > > > > > > > > *
> > > > > > > > > (: have an awesome day :)
> > > > > > > > > *
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > --- On Wed, 7/13/11, dnwinberry wrote:
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > > Hello all,
> > > > > > > > > >
> > > > > > > > > > I have a bound form that displays information from several
> > > > > > > > > > different tables. It's record source is a query. When I
> > > > > > > > > > change some of the data, I have a Save button that becomes
> > > > > > > > > > visible with an on click event to save the changes. It's
> > > > > > > > > > code is:
> > > > > > > > > > If Me.Dirty Then
> > > > > > > > > > Me.Dirty = False
> > > > > > > > > > 'display splash form "Record
> > > > > > > > > > has been saved" which closes automatically
> > > > > > > > > > DoCmd.OpenForm
> > > > > > > > > > "frmRecordIsSaved", acNormal
> > > > > > > > > > Me.cboLookup.SetFocus
> > > > > > > > > > Me.btnSave.Visible = False
> > > > > > > > > > Me.Refresh
> > > > > > > > > > End If
> > > > > > > > > >
> > > > > > > > > > This works fine for the first record that is changed.
> > > > > > > > > > However, after I have saved one record and display another
> > > > > > > > > > and change something the procedure doesn't save the changes.
> > > > > > > > > > It gives no errors, the form is refreshed and the changes
> > > > > > > > > > are gone. Thinking I might have form corruption, I built a
> > > > > > > > > > new form and it is doing the same thing. I went to prepare a
> > > > > > > > > > sample for uploading and after deleting all the extra forms,
> > > > > > > > > > reports and etc. and importing the tables from the backend
> > > > > > > > > > into the front end, the behavior stopped and it started
> > > > > > > > > > working perfectly. I'm bum-fuzzled. Does anyone have a clue
> > > > > > > > > > as to why this might be happening?
> > > > > > > > > >
> > > > > > > > > > Doyce
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > [Non-text portions of this message have been removed]
> > > > >
> > > >
> > >
> >
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
Tidak ada komentar:
Posting Komentar